GE 90-30 PLC Series Installation And Hardware Manual page 49

Figure 2-7. IC693ACC308 Front Mount Adapter Bracket Installation
Dimensions for rack mounting a 10-slot baseplate with the IC693ACC308 Front Mount Adapter
Bracket are shown in the following figure.
Figure 2-8. Dimensions for 19-inch Rack Mounting Using IC693ACC308 Adapter Bracket
GFK-0356Q Chapter 2 Installation
IC693ACC313 Recessed Mount Adapter Bracket. Used to recess mount a baseplate inside
a 19" rack. A baseplate mounts on the rear panel of this adapter bracket using four 8-32
(4mm) screws, nuts, lock washers, and flat washers. The Adapter Bracket bolts through its
four slotted holes to the face of the 19" rack using applicable hardware (lock washers
recommended).
RIGHT SIDE OF
BASEPLATE
Note: Baseplate is shown with cover removed for illustration purposes. It
is not necessary to remove the baseplate cover to install the bracket.
18.89
(480)
DIMENSIONS IN INCHES (MILLIMETERS IN PARENTHESES)
Insert two screws (1 at top; 1 at bottom)
from back of base unit through base unit
and bracket. Tighten screws to secure
bracket to base unit.
18.47
(469)
2
2-9