GE 90-30 PLC Series Installation And Hardware Manual page 409

H
IC693ACC329 TBQC Terminal Block
Use with the following 16-point I/O modules:
Figure H-3. IC693ACC329 TBQC Terminal Block
Mounting
These terminal blocks are mounted on a standard, user-supplied 35 mm DIN-rail.
H-6 Series 90-30 PLC Installation and Hardware Manual – August 2002
IC693MDL240
IC693MDL645
IC693MDL646
Width
Height (all blocks) 2.25" (57mm)
Depth (all blocks) 1.7716" (45mm)
2 4
1 3 5
C C C C C C
The common row terminals (labeled with the letter C) are provided for wiring
convenience. Their use is optional. They are electrically isolated from the numbered
terminals. You may use them as is, or jumper them to a numbered terminal. Refer to
GFK-0898, Series 90-30 PLC I/O Module Specifications Manual for wiring diagrams of
the modules.
2
1
4.44" (112mm)
6 8 10 12 14 16 18
7 9 11 13 15 17
C C C C C C
Note
a45586
20
19
Maximum wire size
per terminal: one
#14 AWG (2.10 mm
20
TERMINAL
19
BLOCK
C C C C C
(See Note 1
Below)
GFK-0356Q
2)