Ic693Pwr330 High Capacity Power Supply, 120/240 Vac/125 Vdc Input - GE 90-30 PLC Series Installation And Hardware Manual

4

IC693PWR330 High Capacity Power Supply, 120/240 VAC/125 VDC Input

The IC693PWR330 High Capacity Power Supply is rated for 30 watts output. For applications
requiring greater +5V current capacity than is available with the standard supply
(IC693PWR321), this supply allows all 30 watts to be consumed from the +5V supply. It can
operate from an input voltage source in the range of 85 to 264 VAC or 00 to 300 VDC. This
power supply provides the following outputs:
The load capacity for each output of this power supply is shown in the following table.
Table 4-4. IC693PWR330 Power Supply Capacities
IC693PWR330 30 Watts
* Total of all outputs combined cannot exceed 30 watts.
Figure 4-2. High Capacity AC/DC Input Power Supply - IC693PWR330
4-4 Series 90-30 PLC Installation and Hardware Manual – August 2002
+5 VDC output.
+24 VDC Relay power output which provides power to circuits on Series 90-30 Output Relay
modules.
Isolated +24 VDC, which is used internally by some modules, can also be used to provide
external power for 24 VDC Input modules.
Catalog Load
Number Capacity
00 to 240 VAC or
25 VDC
IC693PWR330
CONNECTIONS FOR
AC/DC POWER SOURCE
INTERNAL POWER SOURCE FOR
MODULES REQUIRING 24VDC
Nominal
Input Output Capacities (Voltage/Power *)
+5 VDC +24 VDC Isolated
30 watts 20 watts
Series 90-30
HIGH CAPACITY
POWER SUPPLY
PROGRAMMABL
E
INPUT
100-240 VAC
50/60 HZ 100VA
125VDC, 50W
+
24 VDC
OUTPUT
0.8A MAX.
B
A
T
T
E
R
LITHIUM
Y
BACK-UP
BATTERY
+24 VDC Relay
5 watts
PWR
SYSTEM
OK
STATUS
INDICATORS
RUN
BATT
CONTROLLER
RS-485
COMPATIBLE
SERIAL PORT
BATTERY
CONNECTORS
GFK-0356Q