GE 90-30 PLC Series Installation And Hardware Manual page 176

7
DVM Connections
Table 7-2. IC693DVM300 Connections
2
3
4
5
6
7
8
9
0
2
3
4
5
6
7
8
9
20
7-14 Series 90-30 PLC Installation and Hardware Manual – August 2002
Pin
Signal Name
No.
+28V.IN Module Control Power + input terminal (common on pin 2). Supplies power to
module's signal-level circuits and auxiliary + 5 and - 5 Volt power supplies
(pins 2, 3, and 4). Requires external 26 VDC (nominal) power supply
+28V.RET Common terminal for Module Control Power (pin ).
AUX.OUT.+ 5 + 5 VDC @ 0.3A Auxiliary power output for external circuits. Not isolated.
Developed from input power on pins and 2.
AUT.XOUT.- - 5 VDC @ 0.2A Auxiliary power output for external circuits. Not isolated.
5 Developed from input power on pins and 2.
DIGITAL. .IN Channel TTL input connection (common on pin 9)
DIGITAL.2.IN Channel 2 TTL input connection (common on pin 9)
DIGITAL.3.IN Channel 3 TTL input connection (common on pin 9)
DIGITAL.4.IN Channel 4 TTL input connection (common on pin 9)
DIGITAL.RET Common connection for Digital Input Channels - 4 (pins 5 - 8)
+28V .IN Power Supply connection for Output Channels and 2 (common on pin 2).
Required external 26 VDC (nominal) power supply.
+28V2.IN Power Supply connection for Output Channels 3 and 4 (common on pin 2).
Required external 26 VDC (nominal) power supply.
28V &2.RET Common connection for both Output Channel Power Supply inputs (pins 0 and
)
VALVE .OUT Channel Output connection (return on pin 4)
VALVE .RET Return connection for Channel Output (pin 3)
VALVE2.OUT Channel 2 Output connection (return on pin 6)
VALVE2.RET Return connection for Channel 2 Output (pin 5)
VALVE3.OUT Channel 3 Output connection (return on pin 8)
VALVE3.RET Return connection for Channel 3 Output (pin 7)
VALVE4.OUT Channel 4 Output connection (return on pin 20)
VALVE4.RET Return connection for Channel 4 Output (pin 9)
Connection Description
GFK-0356Q