I/O Bus Expansion Cables - GE 90-30 PLC Series Installation And Hardware Manual

3

I/O Bus Expansion Cables

Five prewired I/O Bus Expansion cables are available from GE. Catalog numbers and
lengths of these cables are listed in the following figure. You can build custom cables to suit the
needs of your application if cable lengths other than those listed are required. Refer to the "Cables"
chapter for detailed information on cable type and connectors. Note that the same cables can be
used with both Expansion and Remote baseplates, however the cables used in a remote expansion
system must use the cable type described in the "Cables" chapter.
Figure 3-10. I/O Bus Expansion Cables
3-10 Series 90-30 PLC Installation and Hardware Manual – August 2002
FEMALE
CONNECTOR
Figure A
MALE
CONNECTOR
Figure B
MALE
CONNECTOR
Catalog Number
IC693CBL300
IC693CBL301
IC693CBL302
IC693CBL312
IC693CBL313
The 3 foot cable (IC693CBL300) can be used as a Wye adapter between custom-
built cables and Remote baseplates.
.5, 3, 6, 26 FOOT
CABLES
MALE
CONNECTOR
50 FOOT
CABLE
MALE
CONNECTOR
Length
3 feet (1 meter), continuous shield
6 feet (2 meters), continuous shield
50 feet (15 meters), continuous shield with
built in terminator (this is not a Wye cable)
0.5 feet (.15 meters), continuous shield
25 feet (8 meters), continuous shield
Note
Figure
A
A
B
A
A
GFK-0356Q