Cable Data Sheets - GE 90-30 PLC Series Installation And Hardware Manual

Cable Data Sheets

The next section of this chapter contains cable data sheets. These are listed in numerical order by
catalog number, where possible. However, some data sheets cover more than one catalog number,
so some catalog numbers may be out of order.
Cable data sheets are listed in this order:
IC647CBL704
IC690CBL701
IC690CBL702
IC690CBL705
IC690CBL714
IC693CBL300/301/302/312/313/314
IC693CBL303
IC693CBL304/305
IC693CBL306/307
IC693CBL308/309
IC693CBL310
IC693CBL311/317/319/320
IC693CBL315
IC693CBL316
IC693CBL321/322/323
IC693CBL327/328
IC693CBL329/330/331/332/333/334
IC693CBL340/341
GFK-0356Q Chapter 10 Cables
Cable Data Sheet Catalog
Numbers
Description
Workstation Interface board to Series 90 CPU
PCM to Workmaster (IBM PC-XT)
PCM to IBM PC-AT
PCM to Workmaster II (IBM PS/2)
Series 90 Multidrop
I/O Bus Expansion cables, continuous shield. This data sheet also
includes information on building custom length I/O Bus Expansion
Cables.
Hand-Held Programmer cable, 6 feet (2 meters)
WYE cables – Port expansion cable s used with PCM 300,
PCM301, PCM311, and CMM311
Extension cables for 50-pin connectors on high-density I/O
modules
I/O Interface cables for 50-pin connectors on high-density I/O
modules
I/O Interface cable for 24-pin connectors on high-density I/O
modules, 10 ft. (3 m). Obsolete.
I/O Interface cables for 24-pin connectors on APU301/302
I/O Interface cable for 24-pin connectors on high-density I/O
modules, 10 ft. (3 m). Obsolete.
"Station Manager Cable." Serial cable, 3-feet long, with 9-pin D-
shell to 6-pin RJ-11 connectors.
I/O straight connector cables, faceplate to terminal block, 24-pins.
Obsolete.
I/O right angle connector cables, faceplate to stripped leads
I/O right angle connector, faceplate to terminal block, 24-pin.
Includes information on cable kits IC693CBK002/003/004.
PTM interface cables. Connect between PTMPM module (mounts
in Series 90-30 baseplate) and PTMIM board (DIN-rail mounted).
10
Cables
10-7