Ic693Cbl316 Serial Cable, 9-Pin D-Shell To Rj-11 Connector; Description; Typical Applications - GE 90-30 PLC Series Installation And Hardware Manual

IC693CBL316
Serial Cable, 9-Pin D-Shell to RJ-11 Connector

Description

The IC693CBL316 cable is a 3-feet (1 meter) long, shielded cable with a 9-pin D-shell connector
one end and a 6-pin RJ-11 connector on the other. This cable is also known as a "Station Manager
Cable." This cable can interconnect RS-232 ports without the need for a converter.

Typical Applications

Figure 10-33. IC693CBL316A Serial Cable Illustration and Connector Pinouts
GFK-0356Q Chapter 10 Cables
Connect a Personal Computer's 9-pin serial port to the RJ-11 faceplate serial port on CPUs
351, 352, and 363 for programming, configuring, firmware updating, and monitoring purposes.
Connect a Personal Computer's 9-pin serial port to the Station Manager port on an
IC693CMM321 Ethernet module, a IC693CPU364 CPU, or a IC693CPU374 CPU module.
Connect a Personal Computer's 9-pin serial port to an IC693DSM302 module's RJ-11 COMM
port for loading motion programs (1 – 10) and firmware.
Connect a Personal Computer's 9-pin serial port to an IC693DSM314 module's RJ-11 COMM
port for loading firmware (motion programs for this module are loaded across the PLC
backplane).
RJ-11
CONNECTOR
9-PIN
FEMALE
CONNECTOR
9-Pin Connector Pin Number
7
2
5
5
3
8
RJ-11 Connector Pin Number
1 (Red)
2 (Yellow)
3 (Green)
4 (Brown)
5 (Black)
6 (Orange)
10
Cables
10-53