GE 90-30 PLC Series Installation And Hardware Manual page 415

H
Terminal Block
Terminal blocks have three rows of terminals, arranged in three levels, as shown in Figure H-1.
The terminals feature an easy to use captive-screw, "rising cage" type connection system. Catalog
numbers for the terminal block and the modules it can be used with are listed below.
IC693ACC337
Cable Selection and Cross-Reference
Six cables are available for connecting between the modules' faceplate connectors and the terminal
blocks. These cables have right-angle connectors on the module end to minimize the space
required in front of the modules. These six cables replace three obsolete cables that had straight
connectors. Since the modules' two connectors are oriented differently (see previous figure), a
right-side and left-side cable is required. Use the following table to select the correct cables. The
table also lists cable kits that consist of a pair of same length, right side and left side cables.
Cable Current Rating
Each conductor in these 24-conductor cables has a current rating of 1.2 Amps, which is more than
adequate to handle the current requirement of any of the 32-point I/O modules listed in the previous
table.
Catalog Number
IC693CBL329
IC693CBL330
IC693CBL331
IC693CBL332
IC693CBL333
IC693CBL334
IC693CBK002
IC693CBK003
IC693CBK004
H-12 Series 90-30 PLC Installation and Hardware Manual – August 2002
Catalog Use With
Number These Modules
IC693MDL654
IC693MDL655
IC693MDL752
IC693MDL753
Cable Description and Length
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 1.0 Meter
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 1.0 Meter
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 2.0 Meters
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 2.0 Meters
Dual 24-pin, 90 deg. connectors, Left Side
Cable length = 0.5 Meter
Dual 24-pin, 90 deg. connectors, Right Side
Cable length = 0.5 Meter
Cable Kit. Includes both the IC693CBL329 (left side) and IC693CBL330 (right
side) cables
Cable Kit. Includes both the IC693CBL331 (left side) and IC693CBL332 (right
side) cables
Cable Kit. Includes both the IC693CBL333 (left side) and IC693CBL334 (right
side) cables
Module
Description
Input, 5/12 VDC (TTL) Pos/Neg Logic- 32 points
Input, 24 VDC Pos/Neg Logic - 32 points
Output, 5/24 VDC Neg Logic-32 points
Output, 12/24 VDC Pos Logic, 0.5A - 32 points
Cable Kits
Replaces Obsolete
Cable Number
IC693CBL321
IC693CBL321
IC693CBL322
IC693CBL322
IC693CBL323
IC693CBL323
GFK-0356Q