Catalog Number Ic693Cpu341 - GE 90-30 PLC Series Installation And Hardware Manual

CPU341
CPU Type
Total Baseplates per System
Load Required from Power Supply
Processor Speed
Processor Type
Operating Temperature
Typical Scan Rate
User Program Memory (maximum)
Discrete Input Points - %I
Discrete Output Points - %Q
Discrete Global Memory - %G
Internal Coils - %M
Output (Temporary) Coils - %T
System Status References - %S
Register Memory - %R
Analog Inputs - %AI
Analog Outputs - %AQ
System Registers (
for reference table viewing
only; cannot be referenced in user logic program)
Timers/Counters
Shift Registers
Built-in Ports
Communications
Override
Battery Backed Clock
Interrupts
Type of Memory Storage
PCM/CCM Compatibility
GFK-0356Q Chapter 5 CPUs

Catalog Number IC693CPU341

Single slot CPU module
5 (1 CPU baseplate + 4 expansion and/or remote)
490 milliamps from +5 VDC supply
20 MegaHertz
80C188XL
0 to 60 degrees C (32 to 140 degrees F) ambient
0.3 milliseconds per 1K of logic (boolean contacts)
80K Bytes
512
512
1280 bits
1024 bits
256 bits
128 bits (%S, %SA, %SB, %SC - 32 bits each)
9999 words
1024 words
256 words
16 words (%SR)
>2000
yes
1 (uses connector on PLC power supply). Supports
SNP/SNP-X slave protocols. Requires CMM module for
SNP/SNP-X master, CCM, or RTU slave support; PCM
module for RTU master support.
LAN - Supports multidrop. Also supports Ethernet, FIP,
Profibus, GBC, GCM, GCM+ option modules.
yes
yes
yes
RAM and optional EPROM or EEPROM for early
versions. Starting with hardware version IC693CPU341-J
and firmware Release 4.61, only RAM and optional Flash
are supported.
yes
5
CPU341
5-33