GE 90-30 PLC Series Installation And Hardware Manual page 279

10
IC693CBL308/309
I/O Cables (50-Pin) for 32 Point Modules
Function of cable
This cable is used with 32 point High Density modules that have a 50-pin Honda connector
mounted on the front of the module. The modules that use these cable are: IC693MDL652,
IC693MDL653, IC693MDL750, and IC693MDL751.
The I/O cables have a female connector on one end, and stripped and tinned wires on the other end.
Each of the stripped and tinned wires has a label attached to it for ease of identification. The
numbers on these labels correspond with the pin number of the connector wired to the opposite
end.
Specifications
Cable Length
Connectors
Wiring Information
Table 10-3. Wire List for 32 Point I/O Cables
Connector
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10-40 Series 90-30 PLC Installation and Hardware Manual – August 2002
IC693CBL308 3 feet (1 meter)
IC693CBL309 6 feet (2 meters)
50-pin female Honda on end that connects to male connector on module.
Opposite end has stripped and tinned labeled wires for connection to
Connector Interface Assembly
Pin Color Code
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
White/Black
White/Brown
White/Red
White/Orange
White/Yellow
White/Green
Label Connector
Number Pin
Loose End Number
1 26
2 27
3 28
4 29
5 30
6 31
7 32
8 33
9 34
10 35
11 36
12 37
13 38
14 39
15 40
16 41
Label
Color Code Number
Loose End
White/Black/Violet 26
White/Black/Gray 27
White/Brown/Red 28
White/Brown/Orange 29
White/Brown/Yellow 30
White/Brown/Green 31
White/Brown/Blue 32
White/Brown/Violet 33
White/Brown/Gray 34
White/Red/Orange 35
White/Red/Yellow 36
White/Red/Green 37
White/Red/Blue 38
White/Red/Violet 39
White/Red/Gray 40
White/Orange/Yellow 41
GFK-0356Q