Huawei NetCol5000-C Series User Manual page 98

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
If the software version is after V200R002C00SPC050, a QR code will generate in the Start Password
page, used for inputing the barcode and verify code when offline boot is used.

Step 2 Select
verification.
The Service Expert app can be downloaded from Huawei app store and runs on Android.
User interfaces displayed in this document correspond to the APP software version
V100R001C00B043T007 and are for reference only.

For offline boot, enter the barcode and the verification code on the mobile phone app. The
app automatically generates a startup password for the smart cooling product. Then enter
the password on the home screen of the ACC to start the smart cooling product.

For online boot, activate the startup password on the mobile phone app to start the smart
cooling product.
If the initial startup verification is passed, startup verification is not required afterwards.
After factory settings are restored, re-verification for startup is required.
----End
Issue 07 (2020-03-16)
Figure 4-18 Password screen
If the screen shown in Figure 4-19
product.
Figure 4-19 Startup
Offline Boot or Online Boot
Copyright © Huawei Technologies Co., Ltd.
is displayed, tap Confirm to start the smart cooling
as required on the Service Expert app for initial startup
4 Commissioning
90