Initial Configuration; Setting Temperature And Humidity Values And (Optional) Enabling T/H Sensors - Huawei NetCol5000-C Series User Manual

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
No.
7
8
9
10
11
12

4.3 Initial Configuration

4.3.1 Setting Temperature and Humidity Values and (Optional)
Enabling T/H Sensors
Prerequisites



Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H sensor.
displayed.
Issue 07 (2020-03-16)
Items
The current minor alarm
and their quantity (visible
for V200R002 version)
The current warning alarm
and their quantity
The status bar
The alarm bar
Login button / Logout
button
Teamwork control button
The T/H sensors outside the cabinet need to be enabled when they are installed,
otherwise, skip Step 2.
If you need to enable a humidity and temperature sensor, log in as the admin user.
This section describes how to enable Cold aisle sensor 1.
Copyright © Huawei Technologies Co., Ltd.
Note
refers to the current major alarm and their
quantity.
refers to the current warning alarm and
their quantity.
N/A
You can tap
alarm bar to enter the active alarm screen that
displays all active alarms.
indicates that you have not logged in
to the system, and can tap the icon to log in.
indicates that you have logged in to
the system as admin or operator user, and can tap the
icon to log out.
indicates that there is no teamwork control at
present. indicates that there is teamwork
control without alarms at present.
that there is teamwork control with alarms at present.
4 Commissioning
in the
indicates
Figure 4-4 is
71