Huawei NetCol5000-C Series User Manual page 74

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
Menu
Date & Time
Settings
Teamwork
Settings (visible
for V200R002
version)
Issue 07 (2020-03-16)
Parameter Description
Date format Specifies the date
display format for
the ACC.
Date settings Specifies the date
displayed on the
ACC.
Time Specifies the time
displayed on the
ACC.
Time zone Specifies the time
zone displayed on
the ACC.
Teamwork Set the assigned
group No. teamwork control
number.
Air Set the assigned unit
address.
conditioner
address
Teamwork Disable or enable
function the teamwork
function. If the
teamwork function
is disabled, this
device is operating
according to its own
control. If the
teamwork function
is enabled, this
device works in
harmony with others
that in the same
group.
Networking Networking mode
mode
for the teamwork.
The networking
mode set on the
screen must be
consistent with the
actual networking
mode. Otherwise,
the teamwork
control function will
be unavailable.
Number of Number of the smart
smart cooling cooling products in
products in this group (1 to 32
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning
Configuration Principle
Set the parameter according to
reading habits.
Set the parameter according to
the actual situation.
Set the parameter according to
the actual situation.
Set the parameter according to
the actual situation.
The number of the teamwork
controlled group, which is the
same for all the devices in the
group.
Air conditioner addresses should
be different from each other.
Set this parameter based on the
onsite device heat distribution.
Networked over CAN or
MAC_CAN. CAN network
indicates teamwork control over
a CAN bus, MAC_CAN
network teamwork control over
an FE port.
Total number of the smart
cooling products in this group.
66