Valves And Cylinder Head Removal - Suzuki Swift User Manual

VALVES AND CYLINDER HEAD
ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE) 6A1-41
1. Valve cotters
2. Valve spring retainer
3. Valve spring:
be sure to position
spring in place with its
bottom end (small-pitch
end) facing the bottom
(valve spring seat side).
4. Valve stem seal
5. Valve spring seat
6. Exhaust valve
7. Intake valve
8. Cylinder head bolt
9. Camshaft housing bolt
REMOVAL
1) Relieve fuel pressure according to procedure described in Sec-
tion 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
4) Remove air cleaner outlet hose as previously outlined.
.
3.5 N m (0.35 kg-m)
10. Camshaft housing:
Apply sealant to mating surface of
No.1 and No.6 housings.
11. Valve guide
12. Oil venturi plug
13. Cylinder head gasket:
"TOP" mark provided on gasket comes to
crankshaft pulley side, facing up
(toward cylinder head side).
14. Dowel pin
: Do not reuse
: Tightening Torque
: Apply engine oil to sliding
: surfaces of each part.