Siemens 6RA7086-6KS22 Operating Instructions Manual page 638

Parameter list
PNU Description
n812 Receive data on paralleling interface
(2812)
When U806=1 (master) is selected
i001 Receive data from slave with address 2, word 1
(G195)
...
i005 Receive data from slave with address 2, word 5
i006 Receive data from slave with address 3, word 1
...
i010 Receive data from slave with address 3, word 5
i011 Receive data from slave with address 4, word 1
...
i015 Receive data from slave with address 4, word 5
i016 Receive data from slave with address 5, word 1
...
i020 Receive data from slave with address 5, word 5
i021 Receive data from slave with address 6, word 1
...
i025 Receive data from slave with address 6, word 5
When U806=2 to 6 (slave) is selected:
i001 Receive data from master, word 1
...
i005 Receive data from master, word 5
i006 Not in use
...
i025 Not in use
n813 Transmit data on paralleling interface
(2813)
When U806=1 (master) is selected
i001 Transmit data to slaves, word 1
(G195)
...
i005 Transmit data to slaves, word 5
When U806=2 to 6 (slave) is selected:
i001 Transmit data to master, word 1
...
i005 Transmit data to master, word 5
11.90 Parameters for SIMOREG CM (Control Module)
U819 These parameters have no meaning for SIMOREG DC Master!
The SIMOREG CM (Control Module, control section for converting or
to
upgrading systems) requires these parameters.
U835
(for details see operating instructions for SIMOREG CM, order No.
(2819 to
6RX1700-0BD76)
2835)
11.91 Rated DC current of external field device
U838 Rated DC current of external field device
(2838)
0.00 Parameter not yet set
*
Note:
This parameter is operative only if P082 >= 21.
11-174
Value range
[Unit]
Steps
0000 to FFFFH
1
0 to FFFFH
0.00 to 600.00
[SW 1.9 and later]
[A]
0.01A
SIMOREG DC Master
05.05
No. indices See
Factory Change
setting (Access /
Type Status)
Ind: 25 P052 ≥ 0
Type: L2
Ind: 5 P052 ≥ 0
Type: L2
Ind: None P052 = 3
FS=0.00 P051 = 40
Type: O2 on-line
SIEMENS AG 6RX1700-0AD76
Operating Instructions