Appendix C Horizontal And Vertical Unit Installations; Rubber Feet And The Orientation Of Unit Installations; Figure C-1 Rubber Feet Placement For Vertical And Horizontal Installations - Honeywell Rapid Eye Hybrid LT Installation Manual

Hide thumbs Also See for Rapid Eye Hybrid LT:

Table of Contents

Horizontal and Vertical Unit Installations

Document 800-07766V4 Rev A

01/2013

The Rapid Eye Hybrid LT unit can be installed one of the two following orientations (see

Figure

C-1):

•

Horizontal. The rubber feet come pre-installed on the unit for horizontal installations.

•

Vertical. If a vertical installation is required, see

Installation

on page

your Rapid Eye Hybrid LT DVR.

Figure C-1

Rubber Feet Placement for Vertical and Horizontal Installations

Keep the rubber feet installed on the bottom of the unit

if you are using a horizontal installation.

Remove the rubber feet from the unit bottom and screw

the rubber feet into the left side of the unit if you are

using a vertical installation.

Rapid Eye Hybrid LT unit

installed horizontally

Installing Rubber Feet for a Vertical

for the procedure to change the rubber feet placements on

Rapid Eye Hybrid

LT unit installed

vertically

Table of Contents