Setting The Dvr To React To Events; Configuring The Alarm-In Settings; Figure 3-48 Event Menu - Honeywell HRSD40F User Manual

Save your changes by highlighting Save and pressing
screen without saving the changes.

Setting the DVR to React to Events

You can program the DVR to detect and to react to many different events. You can
program it to:
•
•
•

Configuring the Alarm-In Settings

The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can:
•
•
•
•
Highlight Alarm-In in the Event menu and press
The Alarm-In setup screen appears.
80
Record
Activate the alarm output
And/or notify the remote site whenever alarm, motion, text-in, or video loss events
are detected
Set up each input on the Alarm-In Setup screen
Turn each input On (via Alarm I/O or Camera Alarm) or Off
Give each input a title
Independently set the inputs as NO (normally open) or NC (normally closed)
Figure 3-48 Event Menu
HRSD40F DVR User Guide
. Select Cancel to exit the
.