5.9
FUNCTION PROGRAMMING
Select 6 to access programming options.
5.9.1 PTZ Tour
PTZ Tour – Select 1 to program, run, or
delete a PTZ (pan, tilt, zoom) tour.
This menu option is a feature of the
Honeywell Diamond protocol and is only
displayed when standard, or MUX-100
protocol is selected on the DIP switch on
the scan.
Rev. 1.02
---- UltraDome HD6 ----
1 Language ............................... English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
FUNCTION PROGRAMMING
1 PTZ Tour
2 VectorScan
67
519543-1980
900.0679
22-June-2006