Menu Structure - Honeywell HD6 Series User Manual
Ptz camera in a dome
Hide thumbs
Also See for HD6 Series:
- Specification (4 pages) ,
- Specfications (4 pages) ,
- Installation manual (56 pages)
Table of Contents
Advertisement
4.1
INTRODUCTION, CONTINUED
•
When using a HEGSA002 Ultrakey (with default menu programming):
1. Press the MENU soft key (on left side of screen).
2. Press the Dome Setup soft key on the screen.
3. Press the ENT (hard) key.
To access menu options, use the numeric hard or soft keys on the controller.
The Esc soft key sends an ESC command and exits the HD6 menu.
The EXIT soft key removes the Ultrakey from the HD6 menu mode.
•
The menu options either toggle between the available choices or call up another
menu.
4.2
MENU STRUCTURE
The following setup tree shows the options under each menu in the main setup menu.
Use of specific menus/settings is explained in the Operation sections of the manual.
Rev. 1.02
20
900.0679
22-June-2006
Hide quick links:
Advertisement
Table of Contents
