Liner Installation; Figure 4. Liner Installation - Honeywell HD6 Series User Manual

2.5

LINER INSTALLATION

The liner installed on the HD6 scan can be removed if it is not required for your
application.
To remove the liner:
1. Turn the ¼-turn latches counterclockwise to release the liner.
2. Slide the liner out of the "U-bend" of the liner mounting bracket.
To reinstall the liner:
1. Insert the edge of the liner into the "U-bend" of the liner mounting bracket.
2. Line up the two ¼-turn latches on the liner with the holes on the liner mounting
bracket.
3. Insert the ¼-turn latches into the holes and turn clockwise to secure the liner to the
mounting bracket.
Rev. 1.02
1/4-Turn
Latch
Liner

Figure 4. Liner Installation

Liner
Mounting Bracket
"U-Bend"
14 900.0679
22-June-2006