Exposure Control - Honeywell HD6 Series User Manual

5.8 CAMERA OPTIONS, 25X TRUE DAY/NIGHT CAMERA, CONTINUED

5.8.2 Exposure Control

Select 2 to setup the lens exposure control
options.
1. Backlight mode – the backlight mode can
be set to Manual (MAN) or auto (AUTO)
mode. Select 1 to toggle between manual
and auto mode.
Note: If the HD6 protocol is set for
Honeywell Maxpro mode and the backlight
mode is set to Auto, PreShot command 93
can be used to toggle backlight on or off.
2. Manual Backlight - if the backlight mode
is set to manual mode, the manual
backlight can be set to ON or OFF. Select 2 to toggle the manual backlight on or
off. If the backlight mode is set to Auto, this manual backlight does not apply (NA).
3. Backlight Level 0-80 – This setting selects the brightness level of the Backlight
feature when it is ON, either automatically or manually. The available settings
are from 0 (dark) to 80 (very bright).
Select 3 to change the current level
displayed. Enter the new backlight level
and press Enter.
4. Auto Exposure Level 0-99 – the auto exposure level can be set from 00 (dark) to 99
(bright).
Select 4 to change the current auto
exposure level. Enter the desired level
and press Enter.
Rev. 1.02
1 Zoom and Focus
2 Exposure Control
3 Video Setup
4 White Balance
5 Auto SlowShutter Lim....1/4
6 Vert Phase Edge
7 Vert Phase 1-180
ESC to Exit
1 Backlight Mode...............MAN
2 Manual Backlight.............OFF
3 Backlight Level 0-80.........32
4 Auto Exposure Level.........50
ESC to Exit
Backlight Level .................................... 50
Enter number from 0 to 80 and press
Enter.
Auto Exposure Level ........................... 50
Enter number from 0 to 99 and press
Enter.
62
CAMERA OPTIONS
NONE
....180
EXPOSURE CONTROL
900.0679
22-June-2006