Error Table; Clear The Memory; Clear The Error Table - Honeywell HD6 Series User Manual

5.4 DIAGNOSTIC OPTIONS, CONTINUED

5.4.2 Error Table

The error table lists the 64 bytes (two digit
hexadecimal number) that have been entered
into the error table. Some errors are
represented by single bytes (2 digits) and
some are represented by 2 bytes (4 digits).
Not all entries are actual errors - some are
indications of such things as normal power
down and power up operations. (The codes
used in the error table can be seen by
selecting option 5 - Display Error Tbl. Codes.)
Select 2 to turn the Error Table Display ON or
OFF.

5.4.3 Clear the Memory

Select 3 to clear the memory.
Select Y to clear the memory,
N to cancel, and Esc (F6 on HJZTP
controller) to exit.
Clearing the memory does not clear the
language selection or programmed privacy
zones.
To send the Yes or No command from the
HJZTP controller, press the camera and
preset keys to scroll through the available characters on the LCD display. When Y or N
is flashing on the controller LCD, press the Aux key.

5.4.4 Clear the Error Table

Select 4 to clear the error table.
The HD6 keeps track of the last 64 bytes of
errors and events that occurred during
operation of the unit. Selecting 4 clears the
table.
Rev. 1.02
1 Coordinates................................... OFF
2 Error Table..................................... OFF
3 Clear the Memory
4 Clear the Error Table
5 Display Error Tbl. Codes
6 Restore Default Settings
7 Reset Scan and Camera
8 Upload new firmware to HD6
ESC to Exit
****EXTREME CAUTION****
Alarms PreShots VectorScans and Sectors
memory. Are you sure you
ERROR TABLE HAS BEEN CLEARED
38
DIAGNOSTIC OPTIONS
CLEAR MEMORY
This will delete all of the
that are stored in
want to do this? – Y/N
ESC to Exit
900.0679
22-June-2006