Pan And Tilt Options - Honeywell HD6 Series User Manual

5.3 CONTROL OPTIONS, CONTINUED
If:
More than one alarm
occurs
Note: An alarm can be acknowledged before the contact returns to normal; however the
HD6 will not respond to the alarm again until the contact has reopened and closed
again.

5.3.4 Pan and Tilt Options

Select 4 to set the pan and tilt manual
control options.
1. Manual Speed deg/s –
Select 1 to change the manual pan and
tilt speeds, where the maximum tilt
speed is ½ of the maximum pan speed.
Select 1 to toggle through options:
100°/sec, 200°/sec, 400°/sec
2. Pan Reverse – Select 2 to turn Pan
Reverse ON or OFF. (See table.)
Rev. 1.02
Then:
The scan performs the action for the first alarm and adds the
other alarm numbers to the video in numerical order.
When the first alarm is acknowledged, the scan performs the
action for the next alarm with the lowest number. For
example, alarm contacts 2, 4, and 3 close in the order stated.
The monitor display appears as AL-234. The scan performs
the action programmed for alarm 2.
The AL continues to flash until all alarms are acknowledged
and then is removed from the display.
The alarm numbers flash until the alarm contacts return to
normal (open). When alarm 2 is acknowledged, the number
2 is removed from the alarm display and the scan performs
the programmed action for alarm 3. When alarm 3 is
acknowledged, the number 3 is removed from the alarm
display and the scan performs the programmed action for
alarm 4.
32
.
CONTROL OPTIONS
1 PASS ................................................ON
2 Auto-Pivot ........................................ON
3 Program Alarms
4 Set Pan and Tilt Options
5 Set Default Function
6 Auto Focus.......................................... Z
7 VectorScan Auto Focus ................ OFF
ESC to Exit
PAN AND TILT OPTIONS
1 Manual Speed deg/s ...................... 400
2 Pan Reverse..................................... Off
3 Tilt Reverse ...................................... Off
4 +2 Deg Tilt Limit.............................. Off
5 Find Home on Startup..................... Off
6 Pan Offset ........................................ Off
ESC to Exit
900.0679
22-June-2006