Language - Honeywell HD6 Series User Manual

5.1 MAIN MENU, CONTINUED
If the scan is programmed to Find Home on startup, the scan finds home after the 15-
second countdown. If the scan is not programmed to Find Home on startup, the first
time a scan receives control data with its address, the scan finds home then performs
the command. After the scan finds home, it performs all control commands with its
address immediately. Refer to
On-screen menus are used to set up the receiver board and enable special features.
The MAIN MENU is used to enable and position displays as well as adjust several basic
settings that allow customization of the display.
Each setting on the MAIN MENU is explained in detail in this section.
To make these settings and adjustments, access
the MAIN MENU. Refer to section 4.1 for
examples to accessing the MAIN MENU.

5.1.1 Language

Set Language by selecting 1 from the MAIN
MENU. Continue to select 1 to toggle between
language options (English, French, German,
Italian, Spanish, or Polish).
Rev. 1.02
Section 5.3.4, Find Home on Startup
26
----UltraDome HD6----
519543-1980
1 Language............... English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
----UltraDome HD6----
519543-1980
1 Language............... English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
22-June-2006
900.0679