Honeywell HD6 Series User Manual page 106

7.5.2 Programming Privacy Zones, 23x Wide Dynamic Range/True Day/Night Camera,
Continued
7. Enter a Privacy zone title (up to 24 characters).
a. Press the camera and preset keys to scroll through all available characters.
b. Continue step a. until the title is sent to the HD6.
c. Press Enter (F5). The following options are displayed on the monitor.
8. Press the camera or preset keys until the character for the desired option is flashing
on the controller LCD. Note: If you want to program zone coordinates, you can also
press the Sequence key to send the save command to the HD6.
9 If you selected S (or Sequence) to program zone coordinates, perform the following
steps.
a. Using the joystick, move the block over the area to be hidden.
b. Press the F1 ( ), F2 ( ), F3 ( ), and F( ) to increase or decrease the height
Note: the zoom function is disabled while programming a privacy zone.
c. Press Enter (F5) when done. When the camera is positioned within the defined
10. Program another privacy zone or press Esc (F6) to exit programming.
Rev. 1.02
When the desired character is flashing on the LCD, press the aux key.
E to edit the title
S to program zone coordinates
D to delete zone coordinates
N to save privacy zone title only
and width of the privacy block.
block, the block is displayed on the video to conceal the video.
92 900.0679
22-June-2006