Indoor Dome With Safety Lanyard Installed On Lower Dome At Factory; Figure 5. Installation, Lower Dome With Safety Lanyard Installed At Factory On Lower Dome - Honeywell HD6 Series User Manual

3.1 LOWER DOME INSTALLATION, CONTINUED

3.1.2 Indoor Dome with Safety Lanyard Installed on Lower Dome at Factory

1. Locate the safety lanyard on the lower dome.
2. Slide the ball on the lanyard into the clip on the housing as shown in the illustration.
3. To install the lower dome so it has to be removed with a tool, perform the following
steps, otherwise, go to step 4.
a. Locate the bag containing a lock screw and 5/64" hex key (supplied with the
b. Insert the 2-56 lock screw through the hole in the lower dome trim ring and
4. Align the lower dome with the top and twist to lock the lower dome brackets over the
mounting posts. If you installed the lock screw in step 3, tighten the lock screw in
the lower dome with the 5/64" hex key until it is snug. DO NOT OVERTIGHTEN.
SAFETY LANYARD
TRIM RING

Figure 5. Installation, Lower Dome with Safety Lanyard Installed at Factory on Lower Dome

Rev. 1.02
lower dome).
screw it into the lower dome inner ring.
CLIP
SAFETY CABLE
LOWER DOME
MOUNTING POSTS
(3 PLACES)
LOWER DOME
2-56 CAPTIVE SCREW
(FOR SECURING
LOWER DOME)
16
MOUNTING TABS
HOOK ON POSTS
IN HOUSING
(3 PLACES)
900.0679
22-June-2006