Cisco 28/37/38Xx Integrated Services Router - Cisco SD2008T-NA Configuration Manual

Appendix E Logical Connectivity Diagrams

Cisco 28/37/38xx Integrated Services Router

Figure E-2
28/37/38xx
Integrated
Services Router
2006 Controller
Network Module
These commands are used for communication between the Integrated Services Router and the 2006
controller network module. They are initiated from the router.
•
•
•
•
•
Note Refer to the Cisco Wireless LAN Controller Module Feature Guide for more information. You can find
this document at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xa2/bo
xernm.htm#wp2033271
OL-9141-03
Logical Connectivity Diagram for the Cisco 28/37/38xx Integrated Services Router
Console
Router CPU
(Cisco IOS Software)
Fast Ethernet
Fast Ethernet 1
256 MB
Compact Flash
interface wlan-controller slot/unit (and support for subinterfaces with dot1q encap)
show interfaces wlan-controller slot/unit
show controllers wlan-controller slot/unit
test service-module wlan-controller slot/unit
test HW-module wlan-controller slot/unit reset {enable | disable}
Cisco 28/37/38xx Integrated Services Router
Memory
Flash
CPU
Memory
Cisco Wireless LAN Controller Configuration Guide
StrataFlash
E-5