Chapter 12
Configuring Hybrid REAPWireless Device Access
Figure 12-7
Click the Details link of the desired access point. The All APs > Details page appears (see
Step 3
Figure 12-8
The last parameter under Inventory Information indicates whether this access point can be configured
for hybrid REAP. Only the 1130AG and 1240AG access points support hybrid REAP.
Choose H-REAP from the AP Mode drop-down box to enable hybrid REAP for this access point.
Step 4
OL-9141-03
All APs Page
All APs > Details Page
Cisco Wireless LAN Controller Configuration Guide
Configuring Hybrid REAP
Figure
12-8).
12-13