Cisco SD2008T-NA Configuration Manual page 326

Configuring Hybrid REAP
Follow the substeps in
a.
"guest-central."
b. When the WLANs > Edit page appears, modify the configuration parameters for this WLAN using
the settings in
choose None from both the Layer 2 Security and Layer 3 Security drop-down boxes, check the Web
Policy check box, and make sure Authentication is selected.
Note
Note
Figure 12-5
Click Apply to commit your changes.
c.
Click Save Configuration to save your changes.
d.
Cisco Wireless LAN Controller Configuration Guide
12-10
Step 1 to create a new WLAN. In our example, this WLAN is named
Figure 12-5 as a reference. In our employee WLAN example, you would need to
If you are using an external web server, you must configure a preauthentication access
control list (ACL) on the WLAN for the server and then choose this ACL as the WLAN
preauthentication ACL under Security Policies > Web Policy. See
information on ACLs.
Make sure to enable this WLAN by checking the Admin Status check box under General
Policies.
WLANs > Edit Page (Centrally Switched Guest Access WLAN)
Chapter 12 Configuring Hybrid REAPWireless Device Access
Chapter 5 for more
OL-9141-03