Vpn Passthrough - Cisco SD2008T-NA Configuration Manual

Chapter 6 Configuring WLANsWireless Device Access

VPN Passthrough

Using the GUI to Configure VPN Passthrough
Follow these steps to configure a WLAN for VPN Passthrough using the controller GUI.
Select WLANs from the navigation bar at top of window.
Step 1
At the WLANs window, select the Edit link next to the WLAN for which you want to configure VPN
Step 2
passthrough.
The WLANs > Edit page appears.
Select VPN Passthrough from the Layer 3 Security drop-down menu (right-hand).
Step 3
Check the Web Policy box and the Passthrough option that appears
Step 4
Figure 6-3
Scroll to the bottom of the WLAN > Edit window to enter the VPN Gateway Address
Step 5
IP address is that of the gateway router that is terminating the VPN tunnels initiated by the client and
passed through the controller.
OL-1926-06OL-9141-03
WLANs > Edit Page (top)
(Figure
Cisco Wireless LAN Controller Configuration Guide
Configuring WLANs
6-3).
(Figure 6-4). This
6-15