Cisco SD2008T-NA Configuration Manual page 390

Catalyst 3750G Integrated Wireless LAN Controller Switch
Reset Commands
These two commands (in this order) are used to reset the controller from the switch. They are not yet
available but will be supported in a future release.
test wireless-controller stop switch_number
•
test wireless-controller start switch_number
•
A direct console connection to the controller does not operate when hardware flow control is enabled on
Note
the PC. However, the switch console port operates with hardware flow control enabled.
Cisco Wireless LAN Controller Configuration Guide
E-8
Appendix E Logical Connectivity Diagrams
OL-9141-03