Cisco SD2008T-NA Configuration Manual page 157

Chapter 5 Configuring Security Solutions
Figure 5-10 CIDS Sensors List Page
This page lists all of the IDS sensors that have been configured for this controller. It also enables you to
edit or remove any of the sensors.
To add an IDS sensor to the list, click New. The CIDS Sensor Add page appears (see
Step 2
Figure 5-11 CIDS Sensor Add Page
Step 3 The controller supports up to five IPS sensors. From the Index drop-down box, choose a number
(between 1 and 5) to determine the sequence in which the controller consults the IPS sensors. For
example, if you choose 1, the controller consults this IPS sensor first.
In the Server Address field, enter the IP address of your IDS server.
Step 4
OL-9141-03
Cisco Wireless LAN Controller Configuration Guide
Configuring IDS
Figure 5-11).
5-27