Cisco SD2008T-NA Configuration Manual page 91

Chapter 3 Configuring Ports and Interfaces
Figure 3-16
Figure 3-16
This configuration has the advantage of load-balancing all 100 access points evenly across all four
AP-manager interfaces. If one of the AP-manager interfaces fails, all of the access points connected
to the controller would be evenly distributed among the three available AP-manager interfaces. For
example, if AP-manager interface 2 fails, the remaining AP-manager interfaces (1, 3, and 4) would
each manage approximately 33 access points.
Follow these steps to create multiple AP-manager interfaces.
Click Controller > Interfaces to access the Interfaces page.
Step 1
Click New. The Interfaces > New page appears (see
Step 2
OL-9141-03
illustrates the use of four AP-manager interfaces to support 100 access points.
Four AP-Manager Interfaces
Configuring a 4400 Series Controller to Support More Than 48 Access Points
Figure 3-18).
Cisco Wireless LAN Controller Configuration Guide
3-39