Cisco SD2008T-NA Configuration Manual page 13

Configuring Mobility GroupsWireless Device Access
11
C H A P T E R
Configuring Hybrid REAPWireless Device Access
12
C H A P T E R
OL-9141-03
Disabling Dynamic Channel and Power Assignment Globally for a Controller
Using the GUI to Disable Dynamic Channel and Power Assignment
Using the CLI to Disable Dynamic Channel and Power Assignment
Viewing Additional RRM Settings Using the CLI
Configuring CCX Radio Management Features
Broadcast Location Measurement Requests
Location Calibration
Using the GUI to Configure CCX Radio Management
Using the CLI to Configure CCX Radio Management
Using the CLI to Obtain CCX Radio Management Information
Overview of Mobility
2
Overview of Mobility Groups
Determining When to Include Controllers in a Mobility Group
Configuring Mobility Groups
Prerequisites
7
Using the GUI to Configure Mobility Groups
Using the CLI to Configure Mobility Groups
Configuring Auto-Anchor Mobility
Guidelines for Using Auto-Anchor Mobility
Using the GUI to Configure Auto-Anchor Mobility
Using the CLI to Configure Auto-Anchor Mobility
Running Mobility Ping Tests
Overview of Hybrid REAP
Hybrid-REAP Authentication Process
Hybrid REAP Guidelines
Configuring Hybrid REAP
Configuring the Switch at the Remote Site
Configuring the Controller for Hybrid REAP
Using the GUI to Configure the Controller for Hybrid REAP
Using the CLI to Configure the Controller for Hybrid REAP
Configuring an Access Point for Hybrid REAP
Using the GUI to Configure an Access Point for Hybrid REAP
Using the CLI to Configure an Access Point for Hybrid REAP
Connecting Client Devices to the WLANs
28
29
29
29
5
7
8
11
11
12
15
1
2
2
4
5
5
6
12
16
Cisco Wireless LAN Controller Configuration Guide
27
27
27
30
31
32
1
7
13
14
6
12
12
15
Contents
13