Available Fax Settings Options - Dell 1355 Color Laser User Manual

8 If necessary, repeat steps 5 to 7.
9 To return to the previous screen, press the

Available Fax Settings Options

You can use the following settings options for configuring the fax system:
Option
Receive Mode TEL Mode Automatic fax reception is turned off. You can receive
FAX
Mode*
TEL/FAX
Mode
Ans/FAX
Mode
DRPD
Mode
Auto Rec Fax
Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call.
Auto Rec Sets the interval at which the printer goes into the fax receive mode
TEL/FAX after the external telephone receives an incoming call.
Description
a fax by picking up the handset of the external
telephone, pressing the remote receive code, and then
pressing .
Automatically receives faxes.
When the printer receives an incoming fax, the
external telephone rings for the time specified in Auto
Rec TEL/FAX, and then the printer automatically
receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that
the call is a telephone call.
The printer can share a telephone line with an
answering machine. In this mode, the printer will
monitor the fax signal and pick up the line if there are
fax tones. If the phone communication is using serial
transmission in your country (such as Germany,
Sweden, Denmark, Austria, Belgium, Italy, France and
Switzerland), this mode is not supported.
Before using the Distinctive Ring Pattern Detection
(DRPD) option, a distinctive ring service must be
installed on your telephone line by the telephone
company. After the telephone company has provided a
separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that
specific ring pattern.
(Back) button.
Faxing
291