Dell 1355 Color Laser User Manual page 355

Line Monitor Off
Low
Medium*
High
Ring Tone Off
Volume
Low
Medium
High*
Line Type PSTN*
PBX
Tone/Pulse Tone*
Pulse(10PPS
)
Pulse(20PPS
)
Resend Delay 8*
3–255
Redial 3*
Attempts
0–9
Redial Delay 1*
1–15
Junk Fax Off*
Setup
On
Remote Off*
Receive
On
Remote Rcv 00*
Tone
00–99
Turns off the volume of the line monitor.
Specifies the volume of the line monitor, which
audibly monitors a transmission through the internal
speaker until a connection is made.
Turns off the volume of the ring tone.
Specifies the volume of the ring tone, which indicates
that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to
Telephone/Fax.
Sets the line type to PSTN.
Sets the line type to PBX.
Sets the dialing type to Tone.
Sets the dialing type to Pulse (10 pulse per second).
Sets the dialing type to Pulse (20 pulse per second).
Specifies the interval between transmission attempts.
Specifies the number of redial attempts to make when
the destination fax number is busy. If you enter 0, the
printer will not redial.
Specifies the interval between redial attempts.
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered
in the Phone Book.
Disables the remote receive feature.
Receives a fax by pressing a remote receive code on the
external telephone after picking up the handset of the
telephone.
Specifies the remote receive code in two digits to start
Remote Receive.
Understanding the Tool Box Menus
353