•
WPS-PBC
•
Operator Panel
•
Dell Printer Configuration Web Tool
Ethernet Cable
1 Select Ethernet Cable, and then click Next.
2 Follow the instructions, and then click Next.
The Advanced Configuration Tool screen appears.
3 Select the printer to be configured in the Select Printer screen, and then
click Next.
NOTE:
try the following steps:
Click Refresh to update the information.
•
Click Enter IP Address, and then enter the IP address of your printer.
•
4 Enter the SSID.
5 Select Type of wireless network.
6 Configure the security setting, and then click Next.
The IP Address Settings screen appears.
7 Select IP Mode depending on your network scheme.
When IPv4 is selected:
Configure the following:
Select Type.
a
Enter the following items:
b
•
IP address of your printer
•
Subnet Mask
•
Gateway Address
When IPv6 is selected:
Configure the following:
Select Use Manual Address.
a
Enter IP address of your printer.
b
90
Installing Printer Drivers on Computers Running Windows
If the printer to be configured is not listed in the Select Printer screen,