Dell 1355 Color Laser User Manual page 104

Select Connect Anyway in the warning dialog box indicating you are
f
entering an unsecured area.
Click Close in the dialog box after confirming the connection is a
g
success.
For Windows Server 2008:
Open Control Panel.
a
Select Network and Sharing Center.
b
Select Connect to a network.
c
Select the network, and then click Connect.
d
Select Connect Anyway in the warning dialog box indicating you are
e
entering an unsecured area.
Click Close in the dialog box after confirming the connection is a
f
success.
For Windows Server 2008 R2 and Windows 7:
Open Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
Enter the Security key and click OK, if necessary.
f
For Fixed IP networks:
1 Set up your computer for wireless connectivity:
NOTE:
If the operating system on your computer provides a wireless configuration
software, use it to change the wireless settings. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select the Wireless Networks tab.
c
Ensure that the check box for Use Windows to configure my wireless
d
network settings is checked.
102
Installing Printer Drivers on Computers Running Windows