Setting Up The Fax System; Changing The Fax Setup Options; Available Fax Setup Options - Dell 1600n User Manual

Setting up the Fax System

From the Fax Setup menu, you can configure many settings for the fax system.

Changing the Fax Setup Options

1
2
3
4
5
6

Available Fax Setup Options

You can use the following setup options for configuring the fax system:
Option
Receive Mode
11 6
Faxing
Press <Menu> until "Fax Setup" appears on the top line of the display.
The first available menu item, "Receive Mode" displays on the bottom line.
Press the scroll button ( or ) until you see the desired menu item on the bottom
line and press <Select>.
Use the scroll button ( or ) to find the status or use the number keypad to enter the
value for the option you have selected.
Press <Select> to save the selection.
If necessary, repeat steps 2 through 4.
To return to Standby mode, press <Return>.
Description
You can select the default fax receiving mode.
• Fax mode: The machine answers an incoming call and automatically goes
into receive mode. The ring count that needs to go into receiving is set in
the System Data. If the user memory is full, the machine is changed to Tel
mode.
• Tel mode: Automatic fax reception is turned off. You can receive a fax by
picking up the handset of the extension phone and then pressing the
remote receive code (refer to the User's Guide ), or press <On Hook Dial>
(you can hear voice or fax tone from the remote machine) and then
pressing <Send Fax> on the operator panel of your machine.
• Ans/Fax mode: The machine can share one phone line with TAD
(Telephone Answering machine). In this mode, TAD will pick up the
phone and machine will monitor the FAX signal (CNG), and it catch line
if there is FAX Tone.
• DRPD mode
Detection. Before service, User should program machine to distinguish
Fax No. Machine will go to reception if it detect Fax Ring Pattern. In some
country, machine does not support it. This option is available only when
you set up the DRPD Mode. For details, see page 125.
:
One of service of Exchanger is Distinctive Ring Pattern