The Tool Box - Dell 1355 Color Laser User Manual

The cursor is located at the first three digits of the IP address.
12 Enter the value of the IP address using the numeric keypad.
13 Press the
The next three digits are highlighted.
14 Repeat step 12 and step 13 to enter all of the digits in the IP address, and
then press the
15 Ensure that IP Address is highlighted.
16 Press the
the button.
The cursor is located at the first three digits of the subnet mask.
17 Enter the value of the subnet mask using the numeric keypad.
18 Press the
The next three digits are highlighted.
19 Repeat step 17 and step 18 to set subnet mask, and then press the
button.
20 Press the
21 Press the
press the
The cursor is located at the first three digits of the gateway address.
22 Enter the value of the gateway address using the numeric keypad.
23 Press the
The next three digits are highlighted.
24 Repeat step 22 and step 23 to set gateway address, and then press the
button.
25 Turn off and turn on the printer.

The Tool Box

NOTE:
When you use IPv6 Mode for network printing, the Tool Box cannot be used
to assign an IP address.
button.
button.
button until Subnet Mask is highlighted, and then press
button.
button and ensure that Subnet Mask is highlighted.
button until Gateway Address is highlighted, and then
button.
button.
Setting the IP Address
55