Dell 1355 Color Laser User Manual page 384

Ans/FAX Mode The printer can share a telephone line with an answering machine.
DRPD Mode
Auto Rec Fax
Purpose:
To set the interval at which the printer goes into the fax receive mode after
receiving an incoming call. The interval can be specified within the range of 0
to 255 seconds. The default is 0 second.
Auto Rec TEL/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after
the external telephone receives an incoming call. The interval can be
specified within the range of 0 to 255 seconds. The default is 6 seconds.
Auto Rec Ans/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after
the external answering machine receives an incoming call. The interval can be
specified within the range of 0 to 255 seconds. The default is 21 seconds.
Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.
Values:
382
Understanding the Printer Menus
In this mode, the printer will monitor the fax signal and pick up the
line if there are fax tones. If the phone communication is using
serial transmission in your country (such as Germany, Sweden,
Denmark, Austria, Belgium, Italy, France and Switzerland), this
mode is not supported.
Before using the Distinctive Ring Pattern Detection (DRPD)
option, a distinctive ring service must be installed on your
telephone line by the telephone company. After the telephone
company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for that
specific ring pattern.