Dell 1355 Color Laser User Manual page 103

NOTE:
If the operating system on your computer provides a wireless
configuration software, use it to change the wireless settings. See the
instructions below.
For Windows XP and Windows Server 2003:
Open Control Panel.
a
Select Network Connections.
b
Right-click Wireless Network Connection and select Properties.
c
Select Wireless Network tab.
d
Ensure that the check box for Use Windows to configure my wireless
e
network settings is checked.
Click Advanced.
f
You can either set the printer to the ad-hoc mode or the infrastructure
g
mode.
For Adhoc mode:
Select Computer to Computer (ad hoc) networks only and close the
dialog box.
For Infrastructure mode:
Select Access point (Infrastructure) networks only and close the
dialog box.
Click Add to display Wireless network properties.
h
Enter the setting that you will send to the printer and click OK.
i
Click Move up to move the setting to the top of the list.
j
Click OK to close the Property dialog box.
k
For Windows Vista:
Open Control Panel.
a
Select Network and Internet.
b
Select Network and Sharing Center.
c
Select Connect to a network.
d
Select the network, and then click Connect.
e
Installing Printer Drivers on Computers Running Windows
101