Configuring Wireless Settings (Dell 1355Cnw Multifunction Color Printer Only) - Dell 1355 Color Laser User Manual

To continue installing the host-based printer driver, click Unblock or
Allow access (for Windows Server 2008 R2 and Windows 7).
6 Check if the printer to be installed is listed in Select Printer, and then click
Next.
NOTE:
following steps:
Click Refresh to update the information.
•
Click Add Printer, and then enter a port name (any alphanumeric string)
•
and an existing IP address for the printer.
7 Select the required items on the Software and Documentation, and then
click Install.
8 Click Finish to exit this tool.
Configuring Wireless Settings (Dell 1355cnw
Multifunction Color Printer Only)
This section describes how to configure wireless settings through Easy Setup
Navigator.
The specifications of wireless setting function are described below:
Item
Connectivity
Connectivity Standard
Bandwidth
Data Transfer Rate
Security
Certifications
Wifi Protected Setup(WPS)
You can select a method to configure a wireless setting from the following:
If the printer to be installed is not listed in Select Printer, try the
Specification
Wireless
IEEE 802.11b/802.11g compliant
2.4 GHz
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11b: 11, 5.5, 2, 1 Mbps
WEP (64/128bits), WPA-PSK (TKIP , AES), WPA-
2PSK (AES)
Wifi, WPA2.0 (Personal)
Push Button Configuration (PBC), Personal
Identification Number (PIN)
Installing Printer Drivers on Computers Running Windows
85