Storing Print Media; Identifying Print Media And Specifications; Supported Paper Sizes - Dell 1355 Color Laser User Manual

• Do not use label sheets that have adhesive to the edge of the sheet. It is
recommended that zone coating of the adhesive is done at least 1 mm
(0.04 inches) away from edges. Adhesive material contaminates your
printer and could void your warranty.
CAUTION:
your cartridges with adhesive. As a result, could void your printer and cartridge
warranties.

Storing Print Media

For proper print media storage, the following guidelines help avoid media
feeding problems and uneven print quality.
• For best results, store print media in an environment where the
temperature is approximately 21°C (70°F) and the relative humidity is
40%.
• Store cartons of print media on a pallet or shelf, rather than directly on the
floor.
• If you store individual packages of print media out of the original carton,
ensure that they rest on a flat surface so that the edges do not buckle or
curl.
• Do not place anything on top of the print media packages.

Identifying Print Media and Specifications

This section provides information on supported paper sizes, types, and
specification.

Supported Paper Sizes

A4 (210x297 mm)
B5 (182x257 mm)
A5 (148x210 mm)
C5 (162x229 mm)
196
Print Media Guidelines
Otherwise the printer occur in a jam and contaminate your printer and
Multipurpose Feeder Priority Sheet Inserter
(MPF)
Y
Y
Y
Y
(PSI)
Y
Y
Y
Y