Advanced Fax Settings - Dell 1355 Color Laser User Manual

4 Press the
the button.
5 Press the
button.
6 Press the
button.
7 Press the
8 Press the
the button.
9 Press the
button.
10 Press the
11 Press the
press the
12 Enter an up-to-five-digit prefix number from 0
13 Press the
14 Reboot the printer by turning the power switch off and then on.

Advanced Fax Settings

NOTE:
The advanced fax settings are only meant for advanced users. Incorrect
settings on this printer may damage the device.
If you are experiencing fax send or receive errors, there is an advanced fax
settings menu which you can access and change the settings accordingly.
To enter the Diagnostic Menu (Customer Mode), follow the instructions.
1 Turn off the printer.
2 Disconnect all network, phone line, and USB cables from the device.
3 Turn on the printer while holding down the
The Customer Mode menu appears.
4 After all the advanced fax settings have been made, you will need to turn
off and on the printer for the new settings to be effective.
294
Faxing
button until Fax Settings is highlighted, and then press
button until Line Type is highlighted, and then press the
button until PBX is highlighted, and then press the
(Back) button to return to the previous menu.
button until Prefix Dial is highlighted, and then press
button until On is highlighted, and then press the
(Back) button to return to the previous menu.
button until Prefix Dial Num is highlighted, and then
button.
button when the prefix dial number on the display is correct.
9, *, and #.
–
and buttons.