Dell 1355 Color Laser User Manual page 382

IPv4 Get IP
Address
IP Address
Subnet Mask
Gateway Address
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the
printer is turned off and then on.
Values:
LPD
Port9100
WSD
SNMP
E-Mail Alerts
EWS
380
Understanding the Printer Menus
AutoIP*
Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Panel Enables the IP address entered on the operator
panel.
Manually sets the IP address allocated to the printer.
Manually sets the subnet mask.
Manually sets the gateway address.
Disable Disables the LPD port.
Enable* Enables the Line Printer Daemon (LPD) port.
Disable Disables the Port9100 port.
Enable* Enables the Port9100 port.
Disable Disables the WSD port.
Enable* Enables the WSD port.
Disable
Disables the SNMP UDP port.
Enable* Enables the Simple Network Management Protocol
(SNMP) UDP port.
Disable
Disables the E-Mail Alert feature.
Enable* Enables the E-Mail Alert feature.
Disable Disables an access to Dell Printer Configuration
Web Tool embedded in the printer.
Enable* Enables an access to Dell Printer Configuration
Web Tool embedded in the printer.