1 Access the Secure Receive Set menu by following steps 1 to 6 in
"To turn the secure receiving mode on:".
2 Press the
button.
3 To return to the previous screen, press the
Using an Answering Machine
To the
Printer
wall jack
You can connect a telephone answering device (TAD) directly to the back of
your printer as shown above.
•
Set your printer to the Ans/FAX Mode and set Auto Rec Ans/FAX
to specify the time for the TAD.
•
When the TAD picks up the call, the printer monitors and takes the line if
fax tones are received and then starts receiving the fax.
•
If the answering device is off, the printer automatically goes into the Fax
after the ring tone sounds for a predefined time.
•
If you answer the call and hear fax tones, the printer will answer the fax call
if you
Set On Hook to On (you can hear voice or fax tones from the remote
machine), and then press the
OR
Press the two-digit remote receive code and hang up the receiver.
318
Faxing
button until Disable is highlighted, and then press the
Line Telephone Answering Device
(Back) button.
(Start) button and hang up the receiver.
Phone