Setting Up The Fax System; Changing The Fax Setup Options; Available Fax Setup Options - Dell 1600n Multifunction Mono Laser Printer User Manual

Setting up the Fax System

Changing the Fax Setup Options

1. Press <Menu> until "Fax Setup" appears on the top line of the display.
The first available menu item, "Receive Mode" displays on the bottom line.
2. Press the scroll button ( or
<Select>.
3. Use the scroll button ( or
option you have selected.
4. Press <Select> to save the selection.
5. If necessary, repeat steps 2 through 4.
6. To return to Standby mode, press <Return>.

Available Fax Setup Options

You can use the following setup options for configuring the fax system:
Option Description
Receive You can select the default fax receiving mode.
Mode
Fax mode (automatic receive mode): The multi-function printer answers an
incoming call and automatically goes into receive mode. The number of rings
before the multi-function printer answers can be set in the Ring To Answer option.
See
printer is changed to Tel mode.
Tel mode (manual receive mode): Automatic fax reception is turned off. You
can receive a fax by picking up the handset of the extension phone and then
pressing the remote receive code (see
(you can hear voice or fax tones from the remote mahine) and then <Send Fax>
on the operator panel.
Ans/Fax mode: The multi-function printer can share one telephone line with an
answering machine. In this mode, the multifunction printer will monitor the fax
signal and pick up the line if there are fax tones. If the phone communication in
your country is serial, this mode is not available.
DRPD mode: Before using the Distinctive Ring Pattern Detection (DRPD) option,
distinctive ring service must be installed on your telephone line by the telephone
company. After the telephone company has provided a separate number for
faxing with a distinctive ring pattern, configure the fax setup to monitor for that
specific ring pattern .
Ring To You can specify the number of times the multi-function printer rings, 1-7, before
Answer answering an incoming call.
) until you see the desired menu item on the bottom line and press
) to find the status or use the number keypad to enter the value for the
page 118 for instructions. If the user memory is full, the multi-function
page 119), or by pressing <On Hook Dial>