Dell 1355 Color Laser User Manual page 95

4 Select Local Installation, and then click Next.
5 Check if the printer to be installed is listed in the Select Printer, and then
click Next.
NOTE:
following steps:
• Click Refresh to update the information.
Click Add Printer, and then enter the details of the printer manually.
•
6 Configure the required items on the Enter Printer Settings screen, and
then click Next.
7 Select the software to be installed, and then click Install.
The Congratulations! screen appears.
8 Click Finish to exit this tool.
The wireless configuration is complete.
When the WPS-PIN operation is successful and the printer is rebooted,
wireless LAN connection is completed.
WPS-PBC
NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to
authenticate and register devices required for wireless configuration, by pressing
the button provided on the access point via wireless routers, and then performing
WPS-PBC setting on the operator panel. This setting is available only when the
access point supports WPS.
1 Select WPS-PBC, and then click Next.
2 Follow the instructions until the Check Setup screen appears.
3 Confirm there are no errors displayed on the operator panel, and then click
NO on the Check Setup screen.
NOTE:
If the printer to be installed is not listed in the Select Printer, try the
If you see any errors, click YES and follow the instruction.
Installing Printer Drivers on Computers Running Windows
93