Sending The Scanned File On The Network - Dell 1355 Color Laser User Manual

8 Login Password
9
Confirm Login
Password
10 Port Number
After you configured settings, go to "Sending the Scanned File on the
Network" on page 279.

Sending the Scanned File on the Network

1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2 Press the
3 Press the
press the
4 Ensure that Scan to is highlighted, press the
5 Press the
(Server), or Search Address book, and then press the
button.
Network (Computer): Stores the scanned image on the computer by
using the SMB protocol.
Network (Server): Stores the scanned image on the server by using
the FTP protocol.
Search Address Book: Select the server address registered in
Address Book.
Enter the password corresponding to the above login
name.
NOTE:
NOTE: Empty password is not valid in the Scan to
Server/Computer feature. Ensure that you have a valid
password for the user login account. (See "Confirming a
Login name and Password" on page 261 for details on how to
add a password in your user login account).
Re-enter your password.
Enter the Server Port Number. If you are unsure, you can
enter the default value of 139 for SMB and 21 for FTP .
(Scan) button.
button until Scan to Network is highlighted, and then
button.
button to select Network (Computer) or Network
button.
Scanning
279